PES 105 D TDS Aqua Putty Stick

The Aqua Putty Stick is a two component repair material in stick form which cures underwater after mixing. It is a metal repair adhesive which develops high mechanical strength in a short period of time.

Typical Applications:

Suitable for emergency repairs to leaking pipe work, tank seams, and flanges.

Surface Preparation:

The material is suitable for application to manually prepared surfaces, all loose material such as old coating and repair materials mus be cleaned from the surface prior to application.

Mixing and Application:

The product is supplied in stick form and therefore the base and activator component are premeasured. Simply break off the required amount of material from the stick and using gloved hands, knead the product until the green and cream components become a consistent light green. The product once fully mixed has a usable life of 15 minutes at 68 degrees Fahrenheit.

Once a consistent mix has been achieved, apply the material by pressing the putty onto the prepared surface.

Cure Times:

At 68 degrees F, the applied materials should be allowed to harden for the time indicated below before being subjected to the conditions indicated. These times will be extended at lower temperatures and reduced at higher temperatures:

Over-Coating Times

• Minimum-the applied material can be over-coated as soon as it is touch dry
• Maximum- The over-coating time should not exceed three (3) hours

Where the maximum over-coating time has been exceeded the surface should be abraded and cleaned.

Storage Life:

Five year is unopened and stored in normal, dry conditions (59-86 degrees)