101 Power Metal Repair Paste is a two component solvent free epoxy metal repair compound. The product has been designed for use on a wide range of metallic surfaces and once cured is readily machinable. The product is suitable for emergency repairs or part of planned maintenance equipment such as worn or damaged pump shafts, cracked pump or valve casings, scored hydraulic rams, worn bearings housings, damaged flanges, leaking tank seams and cracked engine blocks.
Main Characteristics of PES 101 Power Metal Repair Paste
- Two component
- Solvent free epoxy
- 3:1 mixing ratio by volume
- Usable life 25 minutes 68°F (20°C)
- Touch dry 1 hour 68°F (20°C)
- Machinable 2 hours 68°F (20°C)
- 100 Rockwell R Hardness (Once fully cured)
- Applied by spatula or applicator tool
- Available in 1kg, 2kg, 3kg, 30kg pack sizes
Mechanical Properties
Adhesion
Tensile Shear to ASTM D1002 – 2630psi (185kg/cm²)
Compressive Strength
Tested to ASTM D 695 – 15,300psi (1075kg/cm²)
Corrosion Resistance
Tested to ASTM B117 – Minimum 5000 hours
Flexural Strength
Tested to ASTM D790 – 10,000psi (703kg/cm²)
Heat Resistance
Suitable for water immersion up to 158°F (70°C) and intermittent contact with steam up to 248°F (120°). Dry heat resistance up to 392°F (200°C).
PES 101 Power Metal Vs. Belzona 1111 Super Metal
While most products are similar when compared to PES 101 Power Metal Repair Paste, one of the biggest benefits of our product is the lower price. Often times, this product is overpriced but PES-Solutions provides this long-lasting product at a lower price to better benefit our customers and their specific needs. We offer a variety of package options as well, including 500GM, 1KG, 2KG, 3KG and 30KG PES 101 Power Metal Repair Paste.
Specifically designed for metallic surface, this product is great for emergency repairs or part of planned maintenance equipment such as worn or damaged pump shafts, cracked pump or valve casings, scored hydraulic rams, worn bearings housings, damaged flanges, leaking tank seams and cracked engine blocks.
Barbara L Sessions liked this on Facebook.
Amber Clay liked this on Facebook.
I have 8 plastic carbs for an outboard engine. I need to fill the voids in the area above the float bowls to keep gas from sloshing. Will this epoxy hold up to gasoline?
Hello Tim,
Our PES 101 epoxy will hold up to gasoline.
PES 101 Metal Repair Paste
We’d be happy to answer any further questions you may have. Feel free to email us at pes1@pes-solutions.com or call us at (979) 779-8700.