1. Identification of Substance/ Preparation and Company
Product Name: PES 103 Epoxy Putty Stick
Company: POLYMERIC ENGINEERED SOLUTIONS, 5401 HWY 21, BRYAN, TX 77803
For Information: Call 979-779-8700
In an Emergency: Same as Above
2. Hazards Identification
Epoxy Putty Stick may cause irritationt to eyes and skin. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
3. Composition/ Information on Ingredients
Hazardous Components: Bisphernol (Epichlorhydrin)
Case Number: 25068-38-6
Percentage: 10-30%
Classifiacation: (Xi) R36/38, R43; (N) R51/53
4. First Aid Measures: Summon immediate medical assistance after contact with skin, eyes, inhalation or ingestion of the Epoxy Putty Stick.
Eyes: There may be irritation or redness
Skin: There may be irritation and redness at site of contact
Ingestion: There may be soreness and redness of the mouth and throat
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may cause coughing and wheezing.
5. Fire Fighting Measures
Extinguishing Media: Suitable extinguishing media for the surrounding fire should be used.
Exposure Hazards: In combustion emits toxic fumes.
Fire Fighting Equipment: Wear self-contained breathing apparatus, wear protective clothing to prevent contact with skin and eyes.
6. Accidental Release Measures
Refer to Section 8 of SDS for personal protection details. Do not discharge into drains and rivers. Transfer to a suitable container.
7. Handling and Storage:
Avoid direct contact with substance. Avoid incompatible materials and conditions– See section 10 SDS. Must be kept in original packaging only.
8. Exposure Controls/ Personal Protection
Respiratory: Not required during normal use
Ingestion: Not during normal use
Skin Protection: Protective clothing should be worn to avoid skin contact. PVC cloves, neoprene gloves, nitrile gloves, butyl gloves when handling the Epoxy Putty Stick.
Eye Protection: Safety Goggles
9. Physical Chemical Properties
Appearance: Grey Paste
Odor: Characteristic odor
Viscosity: Highly viscous
Specific Gravity: 1.7g/cm3 at 68F
Boiling Point/Range: No Data
Flash Point: Does not flash
Melting Point: No Data
Vapor Pressure: 0.79MM/Hg
10. Stability and Reactivity
Stability: Stable under normal condtions
Conditions to Avoid: Heat and Direct Sunlight
Material to Avoid: Strong Oxidizing agents, Amines
Hazardous Decomposition: In Combustion emits toxic fumes of carbon dioxide/ carbon monoxide. In combustion emits toxic fumes of sulfur oxides. IN combustion emits toxic fumes of nitrogen oxides.
11. Toxicological Information
Hazardous Ingredients: BISPHENOL A-(EPICHLORIYDRIN)
Oral: MUS LD50 15600 mh/kg
RAT LD50 11400 mg/kg
SKN RBT LD50.20ml/kg
Inhalation: N/A during normal use
Eye: Sever irritant. May cause burns
Skin: Severe irritant. May cause burns
12. Ecological Information for the Epoxy Putty Stick:
Insoluble in water
Heavier than water
Not biodegradable
Harmful to aquatic organisms
13. Disposal Considerations
D10 Incineration on land. Dispose of Epoxy Putty Stick in a regulated landfill site or other method fo hazardous or toxic wastes
14. Transport Information
ADR/ RID IMDG/ IMO. IATA/ICAO
15. Regulatory Information
Labeling: Irritant
R Phrases:
(R38/38 Irritating to eyes and skin.
(R43) May cause sensitization by skin contact.
(R52/53) Harmful to aquatic organisms. May cause long term adverse effects in the aquatic environment.
S Phrases:
(S2) Keep out of reach of Children
(S24) Avoid contact with skin
(S29) Do not empty into drains
(S37) Wear Suitable protective clothing/ gloves
Regulations: All components of the Epoxy Putty Stick are listed on the TSCA Inventory or are exempt from listing.
16. Other information
Risk phrases used in section 3 are not previously mentioned: R36/38; Irritation to eyes and skin, R38; Irritating to eyes and skin, R43; May cause sensitization by contact, 551/53; Toxic to aquatic organisms, may cause long term adverse effects in the aquatic environment.